SomeSpeed
Ask Question
Ford F-150 2017 13th gen

I just orders a 2.5” leveling kit for my 17 and plan on doing it myself. Any words of advise or helpful tips?

I just orders a 2.5” leveling kit for my 17 and plan on doing it myself. Any words of advise or helpful tips?

Bryan

2
Reply
Related
Looking to put a 2.5 rough country leveling kit on my ram an opinions on that
43 answers
Will 2.5″ leveling kit make my 13 level or a little higher in the front?
19 answers
Looking at getting a 2.5» leveling kit. Just didn’t know the best out there. Any ideas?
8 answers
Ok I’ve looked and looked but can’t find a 2.5 or 3″ leveling kit for my 2wd 2014
10 answers
2017 JK Running 35s with a Teraflex Leveling Kit (2” Front & 1” Rear) Any advantage to go to a 2.5” Lift?
20 answers
It’s time for new tires what’s everyone running on a 2.5” leveling kit
48 answers
What is the hardest part about putting a 2.5” front leveling kit on a 2010 big horn?
16 answers
What’s a good 2.5” or 3” leveling kit I can get that I don’t have to change the shocks it for ?
11 answers
Whats the preferred leveling kit height without adding extra stress on the trucks normal functions? 2″… 2.5″… or 3″?
37 answers
What do you guys think about 265 75 16 with a leveling kit 2.5 inch. Would like tires look too small? Or go bigger?
25 answers

9 Answers

Nathan

Following

0
Reply
Clay

It’s a pain in the ass, I did it on my 15, fought the first side for 3 hours but once I figured it out it took me 45 min to do the other side

1
Reply
Josh

Rough country has good step by step videos. Whether or not you got their stuff it’s the same steps.

1
Reply
William

Easy if you watch a video first. Disconnect your neg battery terminal before you start. Drop the lower control arm to get the strut out (You will want 2 people to reinstall but can be done with 1 if you’re patient) if you just do one side at a time you will have to turn the strut backwards when you reinstall with level. If you do both at the same time you’ll swap left and right so bolts line up. Watch the videos first!

1
Reply
BryanQuestion author

Thanks guys. I did some research on it. Don’t seem to bad. But that’s from guys who do that stuff every day. I’ll post some pics when i finish!

0
Reply
William

With a little practice takes 2 hours. Plan a day for it with a buddy and take it slow it’s really not bad

1
Reply
William

If you get stuck shoot me a pm i have done about 10 of these

0
John

Make sure you have a big ass pry bar, and a big ass breaker bar for the lower control arm bolts. Make sure you have the right sized sockets for the lower control arms bolts too, I had to run out to get one.

1
Reply
Brian

Make sure you have a cooler filled with beer. You might even want to invest in a bottle of Jack Daniel’s ‘just in case’. If you have small children, keep them away as this job usually requires the generous use of the “F” word. Good Luck!

1
Reply
Your answer Cancel

You must be logged in to post a comment.

Loading Please wait
Log in
Register
  • Contact
  • Privacy Policy
  • Terms and Conditions